refined stm32 example to pass clang format checker
This commit is contained in:
Donghoon Park
parent
3c23889d47
commit
c321e53391
@ -1,7 +1,7 @@
|
||||
BasedOnStyle: LLVM
|
||||
AccessModifierOffset: -4
|
||||
AlignAfterOpenBracket: Align
|
||||
AlignConsecutiveAssignments: None
|
||||
AlignConsecutiveAssignments: false
|
||||
AlignOperands: Align
|
||||
AllowAllArgumentsOnNextLine: false
|
||||
AllowAllConstructorInitializersOnNextLine: false
|
||||
|
||||
@ -47,7 +47,7 @@ extern uint32_t SystemCoreClock;
|
||||
#if defined STM32L5
|
||||
#define configENABLE_TRUSTZONE 0
|
||||
#if configENABLE_TRUSTZONE
|
||||
#define configMINIMAL_SECURE_STACK_SIZE ((uint16_t)1024)
|
||||
#define configMINIMAL_SECURE_STACK_SIZE ((uint16_t) 1024)
|
||||
#endif
|
||||
#define configRUN_FREERTOS_SECURE_ONLY 0
|
||||
#define configENABLE_FPU 1
|
||||
@ -58,11 +58,11 @@ extern uint32_t SystemCoreClock;
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ (SystemCoreClock)
|
||||
#define configTICK_RATE_HZ ((TickType_t)1000)
|
||||
#define configTICK_RATE_HZ ((TickType_t) 1000)
|
||||
#if !defined USE_CMSIS_RTOS_V2
|
||||
#define configMAX_PRIORITIES (5)
|
||||
#endif
|
||||
#define configMINIMAL_STACK_SIZE ((unsigned short)50)
|
||||
#define configMINIMAL_STACK_SIZE ((unsigned short) 50)
|
||||
#define configTOTAL_HEAP_SIZE ((size_t)(32 * 1024))
|
||||
#define configMAX_TASK_NAME_LEN (10)
|
||||
#define configUSE_TRACE_FACILITY 1
|
||||
@ -137,12 +137,10 @@ PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||
|
||||
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||
#define configKERNEL_INTERRUPT_PRIORITY \
|
||||
(configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
#define configKERNEL_INTERRUPT_PRIORITY (configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY \
|
||||
(configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY (configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
|
||||
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||
header file. */
|
||||
|
||||
@ -139,8 +139,7 @@ void SystemClock_Config(void) {
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
// Initialize the CPU, AHB, and APB buses clocks
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
|
||||
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
@ -236,15 +235,12 @@ static void MX_SPI1_Init(void) {
|
||||
hspi1.Init.Direction = SPI_DIRECTION_2LINES; // Set bidirectional data mode
|
||||
hspi1.Init.DataSize = SPI_DATASIZE_8BIT; // Set data frame size to 8 bits
|
||||
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; // Clock polarity low when idle
|
||||
hspi1.Init.CLKPhase =
|
||||
SPI_PHASE_1EDGE; // First clock transition is the first data capture edge
|
||||
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; // First clock transition is the first data capture edge
|
||||
hspi1.Init.NSS = SPI_NSS_SOFT; // Hardware chip select management
|
||||
hspi1.Init.BaudRatePrescaler =
|
||||
SPI_BAUDRATEPRESCALER_2; // Set baud rate prescaler to 2
|
||||
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; // Set baud rate prescaler to 2
|
||||
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; // Data is transmitted MSB first
|
||||
hspi1.Init.TIMode = SPI_TIMODE_DISABLE; // Disable TI mode
|
||||
hspi1.Init.CRCCalculation =
|
||||
SPI_CRCCALCULATION_DISABLE; // Disable CRC calculation
|
||||
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; // Disable CRC calculation
|
||||
hspi1.Init.CRCPolynomial = 10; // CRC polynomial value
|
||||
|
||||
if (HAL_SPI_Init(&hspi1) != HAL_OK) {
|
||||
@ -363,16 +359,25 @@ static void MX_DMA_Init(void) {
|
||||
|
||||
void Error_Handler(void) {
|
||||
// If an error occurs, stay in infinite loop
|
||||
while (1) {
|
||||
}
|
||||
while (1) {}
|
||||
}
|
||||
|
||||
void DMA2_Stream3_IRQHandler(void) { HAL_DMA_IRQHandler(&hdma_spi1_tx); }
|
||||
void DMA2_Stream3_IRQHandler(void) {
|
||||
HAL_DMA_IRQHandler(&hdma_spi1_tx);
|
||||
}
|
||||
|
||||
void DMA2_Stream0_IRQHandler(void) { HAL_DMA_IRQHandler(&hdma_spi1_rx); }
|
||||
void DMA2_Stream0_IRQHandler(void) {
|
||||
HAL_DMA_IRQHandler(&hdma_spi1_rx);
|
||||
}
|
||||
|
||||
void DMA2_Stream7_IRQHandler(void) { HAL_DMA_IRQHandler(&hdma_usart1_tx); }
|
||||
void DMA2_Stream7_IRQHandler(void) {
|
||||
HAL_DMA_IRQHandler(&hdma_usart1_tx);
|
||||
}
|
||||
|
||||
void DMA2_Stream2_IRQHandler(void) { HAL_DMA_IRQHandler(&hdma_usart1_rx); }
|
||||
void DMA2_Stream2_IRQHandler(void) {
|
||||
HAL_DMA_IRQHandler(&hdma_usart1_rx);
|
||||
}
|
||||
|
||||
void USART1_IRQHandler(void) { HAL_UART_IRQHandler(&huart1); }
|
||||
void USART1_IRQHandler(void) {
|
||||
HAL_UART_IRQHandler(&huart1);
|
||||
}
|
||||
|
||||
@ -121,8 +121,7 @@ extern "C" {
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined(LSE_VALUE)
|
||||
#define LSE_VALUE \
|
||||
32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined(LSE_STARTUP_TIMEOUT)
|
||||
@ -135,8 +134,7 @@ extern "C" {
|
||||
* source frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined(EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE \
|
||||
12288000U /*!< Value of the External oscillator in Hz*/
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
@ -153,82 +151,44 @@ extern "C" {
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS \
|
||||
0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS \
|
||||
0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS \
|
||||
0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS \
|
||||
0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS \
|
||||
0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS \
|
||||
0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS \
|
||||
0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS \
|
||||
0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS \
|
||||
0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS \
|
||||
0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS \
|
||||
0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS \
|
||||
0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS \
|
||||
0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS \
|
||||
0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS \
|
||||
0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS \
|
||||
0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS \
|
||||
0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS \
|
||||
0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS \
|
||||
0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS \
|
||||
0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS \
|
||||
0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS \
|
||||
0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS \
|
||||
0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS \
|
||||
0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS \
|
||||
0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS \
|
||||
0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS \
|
||||
0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS \
|
||||
0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS \
|
||||
0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS \
|
||||
0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS \
|
||||
0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS \
|
||||
0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS \
|
||||
0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS \
|
||||
0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS \
|
||||
0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS \
|
||||
0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS \
|
||||
0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS \
|
||||
0U /* WWDG register callback disabled */
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
@ -250,10 +210,8 @@ extern "C" {
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE \
|
||||
ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE \
|
||||
ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
@ -271,60 +229,39 @@ extern "C" {
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
#define PHY_BCR ((uint16_t) 0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t) 0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M \
|
||||
((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M \
|
||||
((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M \
|
||||
((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M \
|
||||
((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION \
|
||||
((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION \
|
||||
((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN \
|
||||
((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE \
|
||||
((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
#define PHY_RESET ((uint16_t) 0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t) 0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t) 0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t) 0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t) 0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t) 0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t) 0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t) 0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t) 0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t) 0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE \
|
||||
((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS \
|
||||
((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION \
|
||||
((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t) 0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t) 0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t) 0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR \
|
||||
((uint16_t)0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR \
|
||||
((uint16_t)0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR \
|
||||
((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
#define PHY_SR ((uint16_t) 0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t) 0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t) 0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS \
|
||||
((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS \
|
||||
((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS \
|
||||
((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
#define PHY_LINK_STATUS ((uint16_t) 0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t) 0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t) 0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN \
|
||||
((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE \
|
||||
((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
#define PHY_MICR_INT_EN ((uint16_t) 0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t) 0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN \
|
||||
((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT \
|
||||
((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t) 0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t) 0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
@ -542,12 +479,11 @@ extern "C" {
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) \
|
||||
((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
#define assert_param(expr) ((expr) ? (void) 0U : assert_failed((uint8_t*) __FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#define assert_param(expr) ((void) 0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
|
||||
Loading…
Reference in New Issue
Block a user